ROMANIA
R-Series: Powerful Bass and High Clarity
COAXIAL-2-WAY-R-SERIES-SPEAKER_R-S69 COAXIAL-2-WAY-R-SERIES-SPEAKER_R-S69 COAXIAL-2-WAY-R-SERIES-SPEAKER_R-S69 COAXIAL-2-WAY-R-SERIES-SPEAKER_R-S69 Chart-R-SERIES-SPEAKER

6" x 9" (16cm x 24cm) COAXIAL 2-WAY R-SERIES SPEAKER - Peak Power: 300 Watts - RMS Power: 100 Watts

R-S69.2

Meet the 2nd generation of R-Series speakers: packed with many improvements for increased sound quality and bass performance.

If you play your music loud and want others to know, the R-Series speakers are the match for you. You’ll enjoy a center sound stage with speakers that play loud and clear without distortion. The R-Series speakers are tuned with emphasis on the high- and low-end frequencies, so they deliver power while naturally producing bright, active sound. They are the perfect power and performance match for the R-Series subwoofers and amplifiers.

  • Peak Power: 300 Watts

  • RMS Power: 100 Watts

  • Frequency Response: 65 Hz - 40 kHz

R-Series speaker

Informatii despre produs
The Alpine R-Series Sound Components

The Alpine R-Series Sound Components

The R-Series line-up is “The Loudest Family on the Block”. The products are designed to be played loud, delivering a fun and exciting listening experience and are known for dependable performance and high-quality sound. All R-Series components are developed to perfectly match each other.

HAMR Surround
Re-Engineered For Highest Performance

HAMR Surround

The High Amplitude Multi-Roll (HAMR) surround allows a maximum, linear cone excursion for high SPL, while maintaining full control over the diaphragm at any excursion stage for high sound clarity.

Re-Engineered For Highest Performance

More power: the 2nd generation of R-Series speakers include many improvements over the 1st generation, such as the increased voice coil diameter from 30 to 35mm, while the Neodymium magnet diameter was also enlarged. This results in a stronger motor structure with a more powerful bass output.

CFRP Cone
Hi-Res Audio Tweeters

CFRP Cone

CFRP (Carbon Fiber Reinforced Polymer) is a very lightweight yet rigid material. On a standard, off-the-shelf speaker cone, the edges are naturally weaker than the center due to the elongated shape. Since the CFRP material is directional, it can be manipulated during the molding process to strengthen the areas of the cone that are normally weak. The result is rigidity throughout the cone that delivers accurate and efficient performance.

Hi-Res Audio Tweeters

The 2nd generation R-Series tweeters feature Hi-Res Audio capabilities with a frequency response of higher than 40kHz. The tweeter cones are constructed by CFRP, allowing them to reproduce very high frequencies of over 40kHz, while maintaining an overall soft and smooth tonal balance of a soft dome tweeter.

Outstanding Clarity
Swivel Tweeter

Outstanding Clarity

The new voice coil is made of Aluminium, compared to regular copper wire coils. We increased the voice-coil diameter from 30mm to 35mm in the 2nd generation R-Series: the benefit is higher clarity especially in the mid-high frequency area and a more powerful bass reproduction.

Swivel Tweeter

Both component and coaxial models feature a ring tweeter that swivels to improve off-axis response in less-than-ideal locations. You can aim it by hand for best imaging and staging at your listening position.

Included Mesh Grill
Included Trim-Rings

Included Mesh Grill

Includes a metal mesh grill to protect the woofer in open installations.

Included Trim-Rings

The included installation adapters allow easy installation in a wide range of vehicles and door speaker mounts.

Performante si specificatii

Features

Tweeter

  • 1′′ (2.5cm) Ring Radiator Tweeter
  • CFRP (Carbon Fiber Reinforced Polymer) Voice Coil
  • Neodymium Magnet
  • Swivel Application
  • Hi-Res Audio Compliant

Woofer

  • CFRP (Carbon Fibre Reinforced Polymer) Cone
  • Linear Drive Technology
  • HAMR Surround
  • Large 35mm Aluminium Voice Coil
  • Aluminium Square Wire
  • Ultra High Density Neodymium Magnet
  • DX Ring
  • Wave Guide
  • Shallow Mounting Design
  • Mounting Adapter Kit Included
  • Bi-Amp Ready Design

Specifications

Power Handling

  • Peak Power: 300 Watts
  • RMS Power: 100 Watts

Dimensions

  • Woofer Mounting Diameter: 150 mm x 220 mm
  • Woofer Mounting Depth: 74 mm

General

  • Frequency Response: 65 Hz - 40 kHz
  • Imp Impedance: 4 Ohms
  • Sensitivity: 90 dB/W (1m)
Referitor la produs
  • COMPONENT-2-WAY-R-SERIES-SPEAKER-R-S65C2
    R-S65C.2
    6-1/2" (16.5cm) COMPONENT 2-WAY R-SERIES SPEAKER - Peak Power: 300 Watts - RMS Power: 100 Watts
  • COAXIAL-2-WAY-R-SERIES-SPEAKER-R-S65
    R-S65.2
    6-1/2" (16.5cm) COAXIAL 2-WAY R-SERIES SPEAKER - Peak Power: 300 Watts - RMS Power: 100 Watts
  • R-Series-4-channel-Power-Amplifier_R-A60F_angle
    R-A60F
    R-Series 4-channel Power Amplifier - RMS Power Ratings 4 x 150W @ 2 Ohms - Total Max Power: 1200W
  • R-Series-Mono-Power-Amplifier_R-A75M_angle
    R-A75M
    R-Series Mono Power Amplifier - RMS Power Ratings 1 x 750W @ 2 Ohms - Total Max Power: 1500W
  • 10-inch-R-Series-Subwoofer-4-Ohm-R-W10D4
    R-W10D4
    10′′ (25 cm) R-Series Subwoofers (4Ω + 4Ω)
  • 10-inch-R-Series-Subwoofer-2-Ohm-R-W10D2
    R-W10D2
    10′′ (25 cm) R-Series Subwoofers (2Ω + 2Ω)
  • 12-inch-R-Series-Subwoofer-4-Ohm-R-W12D4
    R-W12D4
    12′′ (30 cm) R-Series Subwoofers (4Ω + 4Ω)
  • 12-inch-R-Series-Subwoofer-2-Ohm-R-W12D2
    R-W12D2
    12′′ (30 cm) R-Series Subwoofers (2Ω + 2Ω)
Suport